How to Maintenance Laptop Batteries

1. When no external power supply situation, if the working conditions at the time less than temporarily PCMCIA card slot, it is proposed to remove the first card in order to extend battery life.
   
   
2. At room temperature (20-30 degrees) for the battery of the most appropriate operating temperature, the temperature too high or too low operating environment will reduce battery life.
   
   
3. To provide a stable power supply in the environment using a laptop computer, remove the battery to extend battery life by is not correct. ASUS notebook computer on, when the battery power after the full charge, battery charging circuit will automatically shut down, it will not be filling the phenomenon occurred.
   
   
4. Recommendations on average three months to conduct a battery power correction action.
   
   
5. To minimize the use of the number of batteries
   The number of battery charge and discharge is directly related to the life, every time charge, to remove the battery to step forward. Propose that we make full use of external power supply,
   
   
6. Use of external power supply when the battery is removed.
   Some users often several times a day Plug Power, and notebook computers equipped with a battery, to do so, greater damage on the battery. Because each time access to external power supply is equivalent to a battery, battery to naturally.
   
   
7. Electricity exhausted after the charge and avoid charging time is too long
   Regardless of your notebook to use nickel-metal Hydride or lithium electricity, must be exhausted after the rechargeable battery (capacity less than 1%), which is the best way to avoid memory effect. Lithium will be the same memory effect, but its memory effect than Ni-MH small number of them.
   
   
8. Peacetime Caution
   When used in peacetime to prevent exposure to prevent damp to prevent the liquid chemical erosion, avoid contact with the metal battery contacts happen.

images: batfaq .com

How to extend the life of notebook battery

There are many types of portable batteries, different batteries same.Now not the lithium-ion battery commonly used in laptop computers or similar products.Shortly before the computers, 4 laptops based on the temporary use of the premise the use of a nickel-metal hydride battery.Until the mid-nineties, using a nickel-cadmium batteries.After you bought the laptop, first, please read the operation manual, to confirm type of battery, if you do not have the instruction booklet, we can check the specifications of the battery via the website of the laptop.

The "memory effect" is the biggest problem of nickel-hydrogen batteries and nickel-cadmium battery if the battery has not run out of office. When the next time using the battery, there is no power in this place began to circulate this charge.If unabated, the battery life will be shorter and shorter.

Although the effect momory "Ni-MH battery pack is smaller than the nickel-cadmium battery, but the midway is responsible repeated reasons for shortening the life of battery.So, please try to be used completely battery before recharge.

Lithium-ion battery without "memory effect", so even outside half of the burden will not have too much problem.

The method for extending battery life.

Although the lithium-ion battery without "memory effect", but improper use greatly affects life expectancy. By using a lithium-ion battery should pay attention to the following points:

1. Fully charged state not to use AC power / Regulators drive;
2. Using the power saving features;
3. fully once every few months;
4. Disconnect the AC adapter, the laptop when not in use for a long time

5 misunderstandings when use of laptop batteries

Except for the quality of the laptop battery will be an explosion, the misuse of the users themselves are also easy to let the battery has a safety-related incidents.Experts suggested that consumers should avoid the following five situations to the extent possible.

1. Fill portable lithium batteries as much as possible when using with.Lithium battery charging and discharging excess reduced the activity of battery.Therefore in the use of process, not deliberately to 100% charge, used to the automatic shutdown of electricity out.Generally run, when only 10% is necessary to start loading, the load on the 98 percent you can leave the office, this will not create damage to the battery.
   
   
2. While the power of closure can also be placed on the trigger bed.So easily fire batteries overheating, we must avoid this situation.
   
   
3. Remove the battery when not using it to prevent excess charging.The problem of over-charging a lithium battery designed not exist, because the lithium battery protection circuit.When lamp has control of the battery extinguishes explained that has not charges.However, lithium batteries in the overheated environment, aging faster.So if we do not use the battery often taken to avoid damage from overheating.
   
   
4. Full remove the continued use for this purpose except causing a reduction in battery life, it also uses the AC and battery, also create the machine overheated, it is easy to damage the rest of the components.
   
   
5. The battery to meet the needs of electricity or to give the electro-optic preserve. Notebook lithium batteries require regular, if not fully charged or released photoelectric correct.Put low battery so long, the battery will lose business, carry out full load safety risks.Appropriate way to deal with the approval of management is 30%, 40% preserved.